BRZ burnout

Is a BRZ burnout a myth, or not?

From the moment the BRZ & FRS was released, car enthusiasts scolded Subaru & Scion for releasing it with such low power figures. The 200hp and 150lb.ft of torque was just too little for a sports car. It was too slow and the power delivery is not linear. The manufacturers took note, sort of, and released the 2017 cars with 5 more horsepower and torque. Did it make a difference? In the big picture, probably not. However, that did not stop me from attempting a BRZ burnout to see if this new generation car could lay some smoke. After a number of burnout attempts, the verdict was in.

SOLUTIONS to the 5 things I dislike about my BRZ

Providing solutions to the 5 things I dislike about my 2017 BRZ.

Not too long ago I published a video that covered some of my complaints about my 2017 BRZ. Just like any car, the BRZ does have some faults and is not perfect. However, in the case of the BRZ faults, there are plenty of ways you can fix those issues. In this video, we go over some of the more common ways to overcome the 5 things I dislike about my BRZ. In addition, we find out if those stock exhaust tips are adjustable!

5 things I dislike about my 2017 BRZ

The 5 things I dislike about my 2017 Subaru BRZ.

The Subaru BRZ came out in 2013 with much fanfare. There was much anticipation around the BRZ, a coveted “driver’s car” that was light weight and rear wheel driven. As great as it sounded, it was not perfect. Low power and somewhat cheap quality were some of the common complaints about the cars. Despite these imperfections, the BRZ is still a crazy fun car to drive and brings smiles to just about anyone who drives them. I have owned both a 2013 FRS as well as my 2017 BRZ. I have a lot of driving experience in both cars, so I thought it would be a good time to share the 5 things I dislike about my own 2017 BRZ.

BRZ mud flaps install

Protect your Subaru with this BRZ mud flaps install guide.

Nobody likes rock chips or blemishes in their cars paint. By following my Subaru BRZ mud flaps install guide, you can easily protect the lower sections of your car. I did this install on my 2017 Subaru BRZ just after I purchased the car. The new BRZ is a fantastic car and looks great in just about every color it comes in. However, I personally prefer the world rally blue pearl color and went with the BRZ mud flaps to keep the paint free from rock chips. The installation of the mud flaps, or sometimes called splash guards, is fairly straightforward. All you need is basic tools like a screwdriver and drill with drill bits. If you are technically inclined the job can be finished in under an hour.

The BRZ mud flaps have proved to be pretty good upgrade while being relatively inexpensive. If you want to know more, you can also check out my BRZ mud flaps review page.

BRZ exhaust sound

BRZ exhaust sound from my 2017 Subaru BRZ.

The Subaru BRZ has many improvements for model year 2017. Among some of the changes are engine upgrades and interior changes. The engine upgrades result in a slightly different BRZ exhaust sound compared to the previous model year cars. Since the engine has a bit more power and slightly re-worked exhaust system, this was to be expected. But, what does it really sound like? I have recorded the exhaust sound from my Scion FRS in the past and was curious how the new BRZ stacked up. Granted, my 2017 BRZ is bone stock car while my FRS had upgrades. The stock BRZ sounds pretty dang good!

BRZ STi front lip install

It’s time to install my new BRZ STi front lip on my 2017 BRZ! The instructions available for installing the BRZ STi lip are specific to pre-2017 cars, so it was a little bit tricky to figure out. I did have help from another BRZ enthusiast on the FT86club forums. Following these instructions, the BRZ STi front lip install process was fairly straightforward. I was able to successfully install the BRZ STi lip on my own 2017 BRZ. The BRZ STi lip adds an aggressive look to an already great looking car. In my case, I am also using it for a little bit of autocross cone protection for the front bumper 🙂 Be careful though, since the lip hangs down about 1.5″ from the normal bumper, it becomes a bit of a ground clearance hazard.

Subaru BRZ STi front lip un-boxing

A shiny new BRZ STi front lip for my 2017 BRZ!

It’s not often that I get cosmetic upgrades for my cars, but this BRZ STi front lip looks too good to pass up. The front under-spoiler is from the Subaru accessory catalog, so it is a genuine Subaru STi part. The front lip gives the car a lower, more aggressive look. In addition, it will help protect the real bumper from potential dings and impacts. This is especially important when you autocross the car like I do. Nothing like built in cone protection for your shiny new bumper 🙂 You can order your own lip directly from your local Subaru dealership. Check out the video as Shelby and I un-box the BRZ STi front lip! Check back soon for the installation video as well.

BRZ first autocross event

My BRZ first autocross event went great!

I have spent a couple weekends of installing upgrades and modifications on my new 2017 BRZ. This weekend, I had the chance to get my BRZ first autocross event in! My 2017 Subaru BRZ has all of the suspension upgrades in place, as well as the various chassis upgrades. In addition to that, the BRZ has a fresh alignment and corner balancing from my race shop. I have been looking forward to how the new car compares to my old 2013 Scion FRS. Theoretically, the 2017 BRZ should outperform the older FRS. However, the cars are so close performance wise, it might be difficult to notice. Finally, check out how the event went and how the BRZ stacks up performance wise!

More BRZ upgrades

It’s time for more BRZ upgrades!

This particular install session was a mixed bag of various BRZ upgrades. I started off by upgrading the rear subframe and differential mounts with bushing inserts. I used Whiteline bushing inserts, which improve stability and car feedback when driving. These are a great upgrade at a very inexpensive price. In addition to the bushing inserts, we shed some weight on the front of the car by installing a Shorai lightweight battery. A lightweight battery easily saves ~25lbs from on the front of the car. Lastly, to improve stopping power, we installed Hawk HPS brake pads.

BRZ suspension install

After the BRZ suspension install, my car is no longer stock!

Baseline power numbers for my 2017 Subaru BRZ have been acquired, so now it is time to get the BRZ suspension installed! As you might know, the heart and soul of a race car is the suspension and chassis. For this key component, I chose Racecomp Engineering Tarmac 2 coil-over suspension. The springs I am using are RCE 400lbs springs front and rear. Next, Raceseng camber plates manage the front alignment for camber and caster adjustment. Lastly, Whiteline provides added roll stiffness in the front of the car with a 20mm front sway bar. Also included with the front sway bar is adjustable end-links. These modifications will increase the stability and handling of my 2017 Subaru BRZ for better performance when racing. To complete the BRZ suspension modifications, the car will need a race alignment and corner balancing.